What to Inspect if Your Hot Water Service is Not Working

About This

Just how do you really feel about How to Troubleshoot and Repair an Electric Water Heater?



Several modern homes use an electrical hot water heater for their furnace, due to its benefit as well as simplicity of use. Nevertheless, much like any other electrical home appliances, issues may occur with its usage, unexpectedly. It can be really frustrating to wake up to a cold shower instead of a warm one or having your bathroom with water that isn't warm adequate and even as well hot. Whatever the case may be, water heater problems can be fairly aggravating. The good news is, we have actually made a listing of possible remedies to your hot water heater concerns. There are a variety of variables that can create most of these troubles, maybe a concern with the power supply, the electric burner, or the thermostat. Prior to doing anything, guarantee you turn off the main power supply for safety and security. Whatever the trouble is, getting it taken care of ought to not pose way too much of a concern if you comply with these steps:

Call A Professional:


If after changing all malfunctioning parts and resetting your temperature level, the hot water heater still isn't working, you might require to get in touch with an expert plumber for a specialist viewpoint. The issue with your heater could be that the cold and hot taps have been switched over or it may be undersized for the amount of warm water needed in your house. Whatever the situation may be, a specialist plumber would certainly help address the issue.

Check Your Power Supply:


As standard as this may seem, it is extremely essential. Without appropriate power, your water heater will not operate. So the first thing to do when your water unexpectedly stops working is to confirm that it isn't a power trouble. Inspect if the fuse is blown out or the breaker stumbled. If the circuit breaker is the concern, just turn it on and off once again. Replace any kind of damaged or worn-out fuse. Examine the home appliance with power after these changes to see if it's currently working.

Check Your Thermostat:


If your hot water heater still isn't working or the water appearing isn't warm enough, you might need to examine the temperature settings on your top thermostat. Ensure the breaker is switched off prior to doing anything. Open up the access panel and also press the red switch for temperature reset over the thermostat. This must help warm the water. Turn the breaker back on and examine if the issue has actually been fixed.

Check the Heating Element in the Water Heater:


If it's not a power problem, after that try having a look at your burner if it is still working. Check each of your burner to be sure the issue isn't with any one of them. If any of them is malfunctioning, replace that part and after that examine whether the hot water is back on.

Final thought


Hot water heater problems are not constantly significant. Many of them are because of small issues like a blown fuse or worn-out burner. Changing the faulty parts should work. Nonetheless, if you are still not able to address the problem, give a call to your nearby plumber ahead to get it fixed.


8 possible reasons why you have no Hot Water


Along with streaming Netflix and having light flood a room when we flick a switch, having hot water flow from our taps and showerheads whenever we want is an oft-overlooked modern miracle of homeownership. That's why, when that flow goes cold, it can be shocking — and not just in a "Wow, that's freezing" kind of way while you're in the shower.


Water Leak


Before hot water reaches your taps and showerheads, it needs to spend some time in your water heater. This appliance, which can be either gas- or electric-powered, takes the cold water that enters your home from your well or utility company and cooks it until it gets hot. It's akin to an electric tea kettle.



Obviously, if your water heater is leaking, it will never fill with water so it won't have anything to warm. To see if this is the case, simply examine the area around the water heater to see if it is wet. If so, you'll likely need to replace the unit, but you can also call in a pro for a second opinion and to see if it is fixable. Sometimes leaks can happen around fixtures on the water heater, and if so, the solution might be as simple as replacing them.


Gas Heater: Gas Leak


If your hot water is fueled by natural gas and there is a leak in the supply line or where the line enters the tank, the appliance won't have the power it needs to heat up your water. The result is not only inconvenient, but it can be extremely dangerous as well. If you smell gas when you investigate your water heater, call your gas utility company immediately and report it as an emergency. It might also be prudent to leave your home until a repair person from the company arrives. Your utility company will usually fix any kind of gas leak. However, in terms of getting your water heater working again, you'll need to relight the pilot and wait a while to see if it is functioning properly. You can call in a water heater specialist or plumber to help with this.


Gas Heater: Pilot Light Problems


There are two other issues with gas-powered water heaters that can lead to a loss of hot water. The first is a pilot light that's blown out. The pilot light is the source of a constant flame inside your water heater. When the heater determines the need to heat up the water it is holding, it will open a valve that will cause gas to flow over the pilot light and cause it to ignite. To see if your pilot light is functioning, there is usually a small window in the front of the water heater. If you can't see a flame, remove the access panel and see if that helps you locate it. If there is still no flame, you'll need to relight it in accordance with the manufacturer's instructions.



Your pilot light should burn with a bright blue flame. If not, make sure there are no drafts affecting it, which could keep it from functioning properly. If the flame looks yellow, it might be a sign of the presence of carbon monoxide, which spells trouble and needs to be looked at right away by a technician.


Gas Heater: Faulty Thermocouple


The second reason why a gas-powered water heater might fail is a faulty thermocouple. This is a small probe that should sit in the pilot light flame. Its purpose is to stop the flow of gas if it senses that the pilot light is out. Sometimes, these probes get knocked off track, so make sure it is directly in the flame. They can also get a buildup on them that prevents their function, so try cleaning yours off with some steel wool or fine-grit sandpaper. If your pilot light won't stay lit and you've tried these steps to fix the thermocouple, it is likely faulty and needs to be replaced. Call a technician.


Electric Heater: Breaker Blues


Electric water heaters don't have pilot lights, because there is no gas to burn in order to heat up the water. Instead, they do their magic through the use of (naturally) electricity. But that's not to say things can't go wrong with them. If your electric water heater isn't working properly, there's a good chance that a breaker was tripped that supplies the appliance power. Check your breaker box and flip any breakers that have switched to the off position back on. If it trips again, then there might be a fault in the water heater, and you'll want to call in a pro to have a look.


Electric Heater: Reaching The Limit


If the breaker is fine, check to see if the high-temperature limit has switched off on the water heater itself. To do so, first turn off the breaker to the unit. Then remove the service panel and press the red button you'll find there. This is the limit switch, and resetting it could solve your problem. To check, replace the panel, turn the breaker back on and listen to see if the water heater is functioning again.


Electric Heater: Heating Element


If these steps don't fix the issue, then you might have a failed heating element, which will need to be replaced. Unless you are comfortable with such repairs, calling in a technician might make the most sense.

https://www.homeserve.com/en-us/blog/home-improvement/no-water-heater/


No Hot Water — Water Heater Repair

Hopefully you enjoyed reading our article about No Hot Water — Water Heater Repair. Thank you for finding the time to read our blog post. Enjoyed our posting? Please share it. Let someone else check it out. We thank you for reading our article about Hot Water Heater Repair.




Visit Homepage

Leave a Reply

Your email address will not be published. Required fields are marked *